Learning some electrical safety tips to protect your home is vital. Fires can occur due to faulty electrical wiring or overloading. In fact, there are many cases that even led to death and serious injuries.
Electrical Safety Tips
That said, below are some tips to keep your home safe and protected.
First off, ensure you’re using the correct wattage in all your appliances and devices. If your ceiling fixture is unmarked, you can use a 25-watt bulb. When it comes to unmarked light fixtures, use a 60-watt bulb or less.
Many cases of electrical fires were caused by overloading. Never plug in too many sockets in one electrical outlet. Plates should be cool to the touch.
Even extension cords can cause overloading.
Repair Damaged Lines and Wires
As soon as you see damaged lines and wires, call a professional Santa Rosa electrician. It should be repaired as soon as possible to avoid both fire and electrocution.
Ensure that your cord or wire is properly stored. Keep it in a place away from children’s reach. Make sure that it’s also in a cool and dry place.
Attached lines should never be kept under rugs. Besides being a tripping hazard, it can overheat.
Constant use of extension cords can damage both the device and the outlet. Instead, have your electrician install additional outlets in your home.
Another electrical safety tips is to never leave your appliance plugged in when not in use. Pull it out to reduce any risks of overheating and power surges. It can also help with your utility bill as energy is still drained even when your device is unused.